Grease Trap Requirements: Key Actions for Nsw Businesses

Grease Trap Requirements: Key Actions for Nsw Businesses

For businesses that prepare or serve hot food and discharge wastewater into the Sydney Water sewer system, it is essential to have an approved grease trap, along with bucket traps in every preparation sink and floor waste. You must also obtain prior approval from Sydney Water before any discharge occurs.

Following installation, the grease trap must be regularly pumped out by an authorised Wastesafe transporter, as detailed in your service agreement.

These points cover the fundamentals. The following sections will provide an in-depth look at operational guidelines, the correct sizing of grease traps, and common pitfalls that can result in unnecessary costs for food businesses.

Grease trap pit with the lid removed showing the basket inside

Why Are Grease Traps Crucial for Your Business?

Fats, oils, and grease (FOG) do not stay in liquid form. They enter sinks while warm, cool down in the pipes, and eventually solidify. The impact of a single kitchen discharging these substances can be significant. When numerous kitchens across Sydney do the same, it leads to blockages and overflows in the public wastewater system, with some waste contaminating rivers and oceans.

A grease trap works by slowing the flow of wastewater, allowing it to cool and permitting the grease to separate and float, while the water continues to flow. Bucket traps installed in sinks and floor wastes capture food scraps before they enter the sewer system. Together, these measures ensure that your waste does not become a communal concern.

Who Are the Key Regulatory Authorities?

Business owners often find the regulatory environment perplexing due to the involvement of multiple authorities.

Sydney Water regulates what can be discharged into the sewer system. Any discharge beyond standard household wastewater is classified as trade wastewater, necessitating their approval. They also determine acceptable grease traps, the required sizes for your specific needs, and the frequency of pump-outs.

You can find detailed requirements on sydneywater.com.au, including installation guidelines.

Your local council also plays a significant role in regulating food businesses. Council inspectors assess your operations, including waste disposal management.

If your business is located outside Sydney Water’s jurisdiction, your local water utility will take on the responsibilities of Sydney Water, and their requirements may differ.

Diagram of a grease arrestor showing the inlet, settling chambers and outlet to the sewer

What Are the Essential Steps Before Opening Your Business?

The first step involves obtaining approval from Sydney Water. You will need to apply for permission to discharge trade wastewater. Review the application process, and they will contact you to discuss your specific business requirements.

The application process is free of charge. Completing this step before purchasing or installing any equipment is crucial. Acquiring a grease trap that is not approved for your premises can lead to costly mistakes.

Next, ensure you have the correct pre-treatment systems in place for your kitchen. For most food businesses, this typically includes:

  • In-sink bucket traps: installed in every food preparation sink.
  • In-floor bucket traps: installed in all floor wastes located in food preparation and cooking areas.
  • A suitably sized grease trap: selected from Sydney Water’s approved list and sized according to your maximum hourly flow.

Ensure that the grease trap is installed by a licensed plumber, adhering to the manufacturer’s guidelines, Sydney Water’s specifications, and the Plumbing Code of Australia. Upon completion, your plumber should provide you with a certificate of compliance, which you must retain for your records.

We specialise in installing grease traps for cafés, restaurants, and takeaway shops across the Hills District and Northwest Sydney, covering areas from Castle Hill and Bella Vista to Rouse Hill and Marsden Park. If you are fitting out a new premises, contact us early so we can assist you in sizing and placement before you make any commitments.

Stainless steel floor trap with its basket in a commercial kitchen floor

How to Properly Size Your Grease Trap?

Sydney Water permits grease traps with capacities ranging from 1,000 to 5,000 litres. Smaller units are insufficient for effectively capturing grease, while larger traps become increasingly challenging to clean and service. In high-demand areas, such as busy shopping centre food courts, multiple traps may be required, with a combined capacity of up to 30,000 litres. Beyond this limit, a centralised treatment system, such as dissolved air flotation, must be installed.

Sydney Water provides guidelines for minimum sizes for various types of businesses. Here are a few examples:

  • Cafés, snack bars, and coffee lounges serving hot food: 1,000 litres.
  • Takeaway shops, food court outlets, pizza shops, and charcoal chicken: 1,000 litres.
  • Restaurants with 1 to 69 seats: 1,000 litres.
  • Restaurants with 70 to 199 seats: 1,500 litres.
  • Restaurants with 200 to 399 seats: 2,000 litres.
  • Restaurants and function centres with 800 to 1,000 seats: 5,000 litres.
  • Supermarkets with a chicken cooker: 1,500 litres plus a grease removal device.

These figures represent minimum requirements and should not be viewed as targets. Sydney Water recommends sizing your trap based on your current and anticipated maximum hourly flow. If you plan to extend your operating hours or introduce new equipment like a fryer, accommodating this now will be more economical than needing to excavate later. An undersized trap will struggle to treat your wastewater effectively, potentially leading to Sydney Water mandating additional pre-treatment systems.

What Installation Standards Should Your Plumber Follow?

The placement and connection of the grease trap are as crucial as its size. Sydney Water’s regulations include the following requirements:

  • All wastewater must be directed to the trap: Wastewater from food preparation areas, floor wastes, kitchen sinks, dishwashers, and garbage disposal areas must drain through the grease trap.
  • Proximity to the kitchen: Long pipe runs can allow grease to accumulate before reaching the trap. If unavoidable, measures like heat tracing or steeper pipe gradients can help mitigate this issue.
  • Gravity drainage: The trap should rely on gravity for drainage into the sewer. Pumped systems incur higher operational costs and pose a risk of overflow inside your premises if a pump malfunctions.
  • Proper venting: Adequate ventilation is required for wastewater to cool and facilitate grease separation. A poorly vented trap may run too hot, allowing grease to bypass the trap.
  • Space above the trap: There should be ample clearance above the trap, at least equal to its depth, to allow for servicing access.
  • Access for waste collection: Your waste removal contractor should have nearby parking, and Sydney Water must have safe access for inspections. Multi-storey buildings may require a fixed pump-out line leading to street level.

What Are Your Ongoing Responsibilities After Installation?

This crucial aspect is often overlooked. A grease trap is not a one-time investment; it involves ongoing obligations as outlined in your agreement with Sydney Water.

Your agreement specifies how often the trap must be pumped out, which depends on its size, the volume of waste generated, and its grease content. An authorised Wastesafe transporter must perform the pump-out, during which they will empty the trap, clean and scrape its internal surfaces, and scan a barcode on-site to provide Sydney Water with a service record. Be aware that Sydney Water charges a management fee for the Wastesafe system, and your transporter will bill you separately for pump-out and disposal services.

The schedule in your agreement reflects the minimum frequency. If your trap is blocking or emitting unpleasant odours before the next scheduled pump-out, this indicates that your kitchen is generating more grease than anticipated, prompting a discussion with us or Sydney Water.

You are also responsible for maintaining the trap’s functionality. Issues such as a damaged baffle, a cracked lid, or leaks indicate that the trap is not performing its intended function. Grease traps typically have a long lifespan, but they do wear out over time. Older traps that have stored grease for extended periods can be difficult to repair. A licensed plumber can advise whether repair or replacement is the best option. If you choose to proceed with repairs or upgrades, you must apply through Tap in to amend your agreement beforehand.

It is also important to notify Sydney Water of any changes to your operations. Adjustments to your menu, extended trading hours, new cooking equipment, or changes in business type can all affect what is required of you.

What Common Mistakes Should You Avoid?

Certain habitual practices can violate your agreement or hinder the trap’s effectiveness, often resulting in both issues:

  • Disposing of waste oil down the drain: Used cooking oil should be collected in a container and sent off-site for recycling, never poured down the sink or grease trap.
  • Using enzymes, bacteria, or odour treatments: Sydney Water prohibits the introduction of solvents, enzymes, natural or engineered bacteria, odour control agents, or pesticides in grease traps.
  • Excessive detergent use: Detergents can break down grease, allowing it to pass through the trap. Using less detergent will save money and enhance the trap’s efficiency.
  • Installing garbage grinders or in-sink disposal units: These devices are not permitted in commercial premises, and Sydney Water can disconnect any business that installs them.
  • Introducing other waste into the trap: Waste from equipment like vegetable peelers should not be sent to the grease trap.

What Are the Consequences of Non-Compliance?

Sydney Water may take action against non-compliance, and repeated violations of your agreement can lead to serious consequences, including disconnection in the case of prohibited equipment. Local councils can also enforce compliance during food premises inspections.

The regulatory body is rarely the immediate concern. The primary issue often emerges as a blocked grease trap on a busy Friday, leading to unpleasant odours wafting into the dining area and halting kitchen operations until the blockage is resolved. Maintaining compliance and ensuring your kitchen runs smoothly are essentially intertwined responsibilities.

What Are the Most Frequently Asked Questions?

Is a grease trap necessary for a small café?

If your establishment cooks or serves hot food, Sydney Water mandates the installation of a grease trap, regardless of the number of seats. For cafés, snack bars, or coffee lounges serving hot food, the minimum required capacity is 1,000 litres.

Who determines the appropriate size of my grease trap?

Sydney Water sets minimum sizes based on business type, with the final size depending on your maximum hourly flow. We can assist you in determining the right capacity and guide you through the Sydney Water application process before you make any purchases.

Can I install a grease trap on my own?

No. Installation must be conducted by a licensed plumber following the manufacturer’s guidelines, Sydney Water’s requirements, and the Plumbing Code of Australia. You should receive a certificate of compliance upon completion.

How frequently should a grease trap be pumped out?

The frequency of pump-outs is determined by your agreement with Sydney Water, based on your trap’s size, waste volume, and grease content. If the trap is blocking or emitting odours before the next scheduled pump-out, the interval may be too long for your kitchen’s needs, regardless of what the paperwork states.

Who is authorised to perform pump-outs on my grease trap?

Only an authorised Wastesafe transporter is permitted to conduct pump-outs. They scan a barcode at each service to ensure Sydney Water can track the waste from your premises to its final disposal.

Is there a fee for applying to Sydney Water?

The application process through Tap in is free. Once you are operational, Sydney Water charges a management fee for the Wastesafe system, while your transporter will bill you separately for each pump-out service.

Can I use enzyme or bacteria treatments to reduce pump-out frequency?

No. Sydney Water does not permit the use of enzymes, bacteria, solvents, or odour control agents in grease traps, and these substances will not alter the pump-out frequency outlined in your agreement.

We have taken over a café that already has a grease trap. Are we automatically compliant?

Not necessarily. It’s important to reach out to Sydney Water through Tap in early to confirm whether the existing agreement and grease trap are suitable for your business, especially if your menu or hours differ from the previous owner’s. Addressing this before your first inspection is significantly easier than rectifying issues afterward.

What if our grease trap is now undersized?

This is a common issue, especially following menu changes or extended trading hours. Upgrading the trap is possible, but you must first apply to Sydney Water to amend your existing agreement. Taking this step before undersizing results in regular blockages is advisable.

How to Ensure Effective Compliance?

Many grease trap complications arise from having a trap that is improperly sized for the business or a pump-out schedule that aligns more with administrative requirements than actual kitchen needs. Sometimes, staff on-site may not know the correct contacts for assistance.

If you are launching a new food business, taking over a premises, or dealing with issues related to an inherited grease trap, consult with The Plumbing Paramedics. We specialise in the installation, servicing, and repair of grease traps for commercial kitchens throughout Sydney’s Hills District and Northwest. We can provide insights into what your premises will likely require before any financial commitments are made. Reach out to us at 0430 054 007.

If you operate a food business in Sydney, you’ve likely been informed about the necessity of a grease trap. the specifics regarding who mandates this requirement, what you must do post-installation, and who will follow up for compliance are often not thoroughly explained.

This is the straightforward version.

Original Article First Published At: Grease Trap Requirements in NSW: What Your Business Actually Has to Do

The Article: Grease Trap Requirements in Nsw: Essential Business Actions first appeared on https://writebuff.com